HANGZHOU UTECS INTERNATIONAL CO., LTD

1, Double cylinder balance injection system

2, Double cylinder bench move (above medium machine)

3, Multi-step injection pressure of injection/speed & positioning control

4, Multi-step pressure of material storage/speed & positioning control

5, High torque oil motor drive screw pre plastication device

6, Screw flow-extend protection device

7, The temperature of barrel is controlled by computer PID

8, Ceramic heating barrel device

9, Cooling temperature control system for barrel outlet

10, Screw speed detection device

Clamping Unit

1, Oblique-row double toggle mechanical mold clamping mechanism

2, Siamese front-link overall casting

3, Mechanical, hydraulic, electrical full interlock protection (above medium machine)

4, Low -pressure mold protection device

5, Multi-step clamping pressure/speed & position control

6, Multiple hydraulic ejector mode

7, High speed mould clamping device

8, Mold cooling water shunt

9, Neutron device standard interface

10, Automatic centralized lubrication system

11, Opening/closing mould, injection position controlled by scale

12, Automatic mould adjustment (Optional)

Parameters:

SPECIFICATION
		A	B	C
INJECTION UNIT
Screw Diameter	m	40	45	48
Screw L/D Ratio	L/D	23.6	21	19.7
Shot Size(Theoretical)	c㎥	245	310	353
Injection Weight(PS)	g	228	290	328
Injection Rate	g/s	118	150	170
Plasticizing Capacity	g/d	18	22	25
Injection Pressure	Mpa	224	177	155
Screw Speed	rpm	0~195
CLAMPING UNIT
Clamp Tonnage	kn	1680
Toggle Stroke	mm	430
Space between tie bars	mm	460X460
Max. Mold Height	mm	480
Min. Mold Height	mm	180
Ejector Stroke	mm	120
Ejector Tonnage	kn	40
Ejector Number	Piece	5
OTHERS
Max. Pump Pressure	Mpa	16
Pump Moto Power	kw	15
Heater power	kw	7.50
L x W x H	m	4.86X1.3X2.05
Machine Weight	t	4.8
Hopper Capacity	L	25
Oil Tank Capacity	L	250